RH413 Unit 3 Create

发布时间：2019-06-30 16:51:51编辑：auto阅读（1611）

There are two major reasons for allocating fire systems separately: containment and mounting with more restrictive mount options.Containment reduces the impact a file systems has on the rest of the system if it fills up. For example, if a program has an error and creates several large temporary file in /tmp , it should not prevent system logging or keep users from saving files in their home directories.

Encryption at installation:

kickstart configuration:

part /home --fstype=ext4 --size=10000 --onpart=vda2 --encrypted --passphrase=PASSPHRARE

Encryption Post-installation:

• Create a LVM:

pvcreate /dev/sdb1
vgcreate storage /dev/sdb1
Volume group "storage" successfully created
lvcreate -l 100%FREE -n luks-test storage
Tips:
we don’t need to create a file system.

• Encrypt the block device and assign it a password:

cryptsetup luksFormat /dev/storage/luks-test
WARNING!
This will overwrite data on /dev/storage/luks-test irrevocably.
Are you sure? (Type uppercase yes): YES
Enter passphrase:
Verify passphrase:

• Unlock the encrypted volume and assign it a logical name:

  cryptsetup luksOpen /dev/storage/luks-test luks
  Enter passphrase for /dev/storage/luks-test:
  luks is the logical name.

• Create a filesystem in the decrypted volume:

  mkfs.ext4 /dev/mapper/luks
  mke2fs 1.42.9 (28-Dec-2013)
  Filesystem label=
  OS type: Linux
  Block size=4096 (log=2)
  Fragment size=4096 (log=2)
  Stride=0 blocks, Stripe width=0 blocks
  65152 inodes, 260608 blocks
  13030 blocks (5.00%) reserved for the super user
  First data block=0
  Maximum filesystem blocks=268435456
  8 block groups
  32768 blocks per group, 32768 fragments per group
  8144 inodes per group
  Superblock backups stored on blocks:
  32768, 98304, 163840, 229376

Allocating group tables: done
Writing inode tables: done
Creating journal (4096 blocks): done
Writing superblocks and filesystem accounting information: done

• Mount it:

  mkdir /mnt/luks
  mount /dev/mapper/luks /mnt/luks/

• When finished, unmount the filesystem then lock the encrypted volume.

  cryptsetup luksClose luks

Persistently Mount Encrypted Partitions

• Locate or generate a key file.This is a typically created with random data on the server and kept on a separate storage device.Make sure it is own by root and the mode is 600

dd if=/dev/urandom of=/root/luks.passwd bs=4096 count=1
chmod 600 /root/luks.passwd

• Add the key file for LUKS using the following command:

  cryptsetup luksAddKey /dev/storage/luks-test /root/luks.passwd
  Enter any existing passphrase:

• Create an /etc/crypttab entry for the volume./etc/crypttab contains a list of devices to be

unlocked during system root.
name /dev/vdaN /path/to/password/file
such as:
luks /dev/storage/luks-test /root/luks.passwd

1.name: Name device mapper will use for the device
2.the underlying “Locked” device
3.the absolute pathname to the password file used to unlock the device

• Edit /etc/fstab
  /dev/mapper/name /mnt/xx ext4 defaults 1 2
  such as:
  /dev/mapper/luks /mnt/luks ext4 defaults 1 2

references:

cryptsetup(8) crypttab(5)

关键字：